Information

How to Mulch With a Toro Lawn Mower

How to Mulch With a Toro Lawn Mower



We are searching data for your request:

Forums and discussions:
Manuals and reference books:
Data from registers:
Wait the end of the search in all databases.
Upon completion, a link will appear to access the found materials.

mower image by Tomasz Wojnarowicz from Fotolia.com

Taking care of a lawn requires regular watering, fertilization and mowing. This allows the grass to fall back to the ground, providing organic material that returns nutrients to the soil for the lawn to reuse. As with any lawn mower, a Toro mower can be used to mulch grass while cutting a lawn as long as it is retrofitted with a mulching blade and a chute cover if the mower is of the bagging variety.

Remove the bag from the Toro mower and use an appropriate screwdriver or wrench to remove the bolts and screws holding the bagging attachment system into place. This is most common on Toro mowers that have the bagging system on the side of the machine. If the mower has a rear-mount bag with a metal cover that falls down over the rear opening when the bag is removed, no chute cover will need to be used.

  • Taking care of a lawn requires regular watering, fertilization and mowing.
  • As with any lawn mower, a Toro mower can be used to mulch grass while cutting a lawn as long as it is retrofitted with a mulching blade and a chute cover if the mower is of the bagging variety.

Turn the mower onto its side, and use an appropriate wrench to remove the blade-mounting bolt, then pull the blade from its mounted location. Install a newly sharpened mulching blade, and bolt it down with the same bolt that was removed. Tighten the bolt firmly into place, then return the mower to an upright position.

Start the mower and mow the lawn, but do so at a slightly slower walking speed than normal, as the mulching blade will grind the grass to a finer consistency and will pull the engine down too hard if attempting to walk at a faster speed.

Clean accumulated grass from the underside of the mower deck after each mowing to ensure the most efficient mowing operation at each consecutive job.

Kits including both blade and chute cover are available for most Toro mowers from Toro company. Be sure to order a kit designed specifically for your model of Toro mower. Some kits provide a chute "plug" that can be inserted into the bagging chute exit itself rather than removing the entire chute to install an actual plate. If one of these is available, save yourself some wrench time and use such a plug instead.


Watch the video: Toro Lawn Mower Grass Bag Replacement #115-4673 (August 2022).